Toshiba B-SX5T Series User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33059
2.9 Setting an Operating Environment
E2-17
2.9.1 Parameter Setting
(Cont.)
(1) Character Code Selection
This parameter is to choose a character code used for printing. Printed
characters differ depending on a chosen character code and font. For
details of characters, refer to the B-SX4T/SX5T Series External
Equipment Interface Specification (Printer Command Manual).
When “<2>PARAMETER SET” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a character code, press the [PAUSE] key.
(2) Character Zero Selection
This parameter is to choose the way to indicate zero between “0” and “Ø”.
When “<2>PARAMETER SET” appears, press the [PAUSE] key twice.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a character zero, press the [PAUSE] key.
NOTE:
B
e careful if the printer is turned off
without pressing the [PAUSE] key,
the selected value does not become
effective.
<2>PARAMETER SET
FONT CODE PC-850
[RESTART]
[FEED]
<2>PARAMETER SET
ZERO FONT 0
ZERO FONT 0
ZERO FONT Ø
[RESTART]
[FEED]
(Without slash)
(With slash)
NOTE:
The following fonts do not support a
z
ero with slash.
B
it Map Font:
OCR-A, OCR-B, GOTHIC 725 Black,
K
anji, Chinese
Outline Font
:
P
rice Font 1, Price Font 2, Price
F
ont 3, DUTCH 801 Bold, BRUSH
738 Regular, GOTHIC 725 Black,
True Type Font
FONT CODE PC-850
FONT CODE PC-852
FONT CODE PC-857
FONT CODE PC-8
FONT CODE PC-851
FONT CODE PC-855
FONT CODE PC1250
FONT CODE PC1251
FONT CODE PC1252
FONT CODE PC1253
FONT CODE PC1254
FONT CODE LATIN9
FONT CODE Arabic
FONT CODE PC-866
FONT CODE UTF-8
FONT CODE PC1257

Toshiba B-SX5T Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Speed	6 ips
Interface	USB, Serial, Parallel, Ethernet
Ribbon Length	600 meters
Barcodes	UPC/EAN/JAN, Code 39, Code 93, Code 128
2D Codes	Data Matrix, PDF417, QR Code
Media Type	tag
Media Thickness	0.06 – 0.254 mm