Toshiba B-SX5T Series - Optional Modules and Interfaces

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33059
1.6 Options
E1- 5
1.6 Options
Option Name Type Usage
Swing cutter
module
B-4205-QM-R A stop and cut swing cutter.
Rotary cutter
module
B-8204-QM-R Rotary cutter
PCMCIA
interface board
B-9700-PCM-QM-R This board enables the use of the following PCMCIA cards.
ATA card: Conforming to PC card ATA standard
Flash memory card: 1MB and 4MB cards (See Section 2.8.)
Built-in LAN
interface board
B-9700-LAN-QM-R This board enables the printer to be used in a LAN network.
USB interface
board
B-9700-USB-QM-R Installing this board enables a connection to a PC which has a
USB interface.
RFID module B-9704-RFID-U1-US-R
B-9704-RFID-U1-EU-R
B-9704-RFID-H1-QM-R
Installing this module enables read and write of RFID tags.
Applicable frequency range differs depending on the module
types:
U1-US: UHF, 902MHz to 928MHz
U1-EU: UHF, 869.5MHz
H1-QM: HF, 13.56MHz
Fanfold paper
guide module
B-4905-FF-QM-R This is a paper guide exclusively used for fanfold paper.
Wireless LAN
board
B-9700-WLAN-QM-R Installing this PC board allows a communication by wireless
LAN.
N
OTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA
TEC Head Quarters.