Toshiba BA410T Series - Bluetooth and NFC Interface Specifications; Serial and Parallel Interface Specifications

6. APPENDIX 1 INTERFACE ENGLISH VERSION
6. APPENDIX 1 INTERFACE
E6-2
Bluetooth (Standard)
Module Name: MBH7BTZ42
Bluetooth version: V2.1 + EDR
Frequency: 2.4000 to 2.4835 GHz
Maximum Transmit: Class 2
Power: +4dBm (Except antenna gain)
Receive Sensitivity: -87 dBm
Data Rates: 1Mbps (Basic Rate)/2Mbps (EDR 2Mbps)/3Mbps (EDR 3Mbps)"
Communication distance: 3m/360deg (For BA400 specification)
Certification (Module): TELEC/FCC/IC/EN
Antenna specification: Mono-pole antenna
Peak Gain: -3.6dBi (2.4GHz)
NFC
Communication standard: MIFARE (ISO/IEC 14443 Type A)
Memory size: It is possible to write in NFC tag.
Operation frequency: 13, 56 MHz
 Optional Serial Interface BA700-RS-QM-S
Type: RS-232C
Communication mode: Full duplex
Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps
Synchronization: Start-stop synchronization
Start bit: 1 bit
Stop bit 1 bit, 2 bit
Data length: 7 bit, 8 bit
Parity: None, EVEN, ODD
Error detection: Parity error, Framing error, Overrun error
Protocol: Unprocedure communication
Data input code: ASCII code, European character 8 bit code, graphic 8 bit code, JIS8 code, Shift JIS
Kanji code, JIS Kanji code
Receive buffer: 1M byte
Connector:
Pin No.
Signal
1
N.C
2
TXD (Transmit Data)
3
RXD (Received Data)
4
DSR (Data Set Ready)
5
SG (Signal Ground)
6
DTR (Data Terminal Ready)
7
CTS (Clear to Send)
8
RTS (Request to Send)
9
N.C