Need help?Do you have a question about the Toshiba B-FV4 Series and is the answer not in the manual?
General| Resolution | 203 dpi |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| 2D Codes | Data Matrix, PDF417, QR Code, Maxi Code |
| Operating Temperature | 5 – 40 °C |
| Storage Temperature | -20 – 60 °C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Interfaces | USB, Serial (RS-232) |
| Media Width | 25.4 – 112 mm |
Guidelines for proper installation and safe service procedures.
Safe operating procedures and skin protection measures.
Visual identification of printer features, including front, rear, and interior views.
Explanation of the model name structure and its components.
Detailed technical specifications for various B-FV4 printer models.
Specifications and pinouts for USB, Ethernet, RS-232C, and Centronics interfaces.
Explanation of the FEED button functions and status indicated by LEDs.
Details on compatible media types, widths, lengths, and diameters.
Diagram and layout of the main PC board and its components.
Detailed pin assignments for various connectors on the main PC board.
Configuration options and functions of the printer's DIP switches.
Step-by-step guide for replacing components in B-FV4T-GS/TS models.
Step-by-step guide for replacing components in B-FV4D-GS/TS models.
Step-by-step guide for replacing components in B-FV4D-GH/GL models.
Identifies printer status via LEDs and provides solutions for common errors.
Addresses common problems affecting print quality and provides solutions.
Instructions and recommended materials for cleaning printer parts.
Procedures for cleaning optional cutter modules to ensure proper function.
Specific instructions for cleaning the cutter module of B-FV4D-GL printers.
Procedures for calibrating feed gap and black mark sensors for media detection.
Steps to reset printer parameters to default factory settings.
How to perform self-tests and understand dump mode operations.
Guide for installing version 1.0.21 of the B-FV Setting Tool software.
Overview of the B-FV Setting Tool interface, including menu, toolbar, and panes.
Details of the toolbar and configuration for USB, COM, LPT, LAN, Multi-LAN ports.
Navigating the tool and configuring General, COM, LAN, IPv6, WLAN, Bluetooth settings.
Guide for installing version 1.0.27 of the B-FV Setting Tool software.
Overview of the B-FV Setting Tool interface, including menu, toolbar, and panes (V1.0.27).
Details of the toolbar and port configuration for V1.0.27.
Navigating the tool and configuring General, COM, LAN, IPv6, WLAN, Bluetooth settings.
Guide for installing version 1.0.34 of the B-FV Setting Tool software.
Overview of the B-FV Setting Tool interface, including menu, toolbar, and panes (V1.0.34).
Details of the toolbar and port configuration for V1.0.34.
Navigating the tool and configuring General, COM, LAN, IPv6, WLAN, Bluetooth settings.
Steps to update printer firmware using USB or COM port with older software versions.
Steps to update firmware using LAN or Multi-LAN connection with older software.
Procedure for updating firmware using a USB flash drive via USB host.
Instructions for updating firmware in Atmel mode when B-FV Setting Tool fails.
Steps to update printer firmware using USB or COM port with newer software versions.
Steps to update firmware using LAN or Multi-LAN connection with newer software.
Procedure for updating firmware using a USB flash drive via USB host.
Explanation of the printer's network architecture and OSI model layers.
List of printer statuses and their corresponding SNMP trap bcpStatusID values.
Information on Management Information Base (MIB) for network objects.
Explanation of the printer's Ethernet port LED indicators and their meanings.
Step-by-step guide to establish a Bluetooth connection with printers.
To Next Page
