Toshiba B-FV4 Series User Manual

7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-26
Resetting Parameter Setting
To reset the Parameter Setting of “Setting Tool” display, perform the following steps:
If you want to reset Parameter Setting, do this:
1. In Parameter Setting, right-click in the blank area in any tab.
2. In the shortcut menu, do one of the following to reset Parameter Setting:
∙ If you want to restore all of the settings to their default
values, click Restore to Default.
∙ If you want to restore the settings of the current tab to
their default values, click Restore Display to Default.
Note The machine setting does not reset.
To reset the printer to “Factory Setting”, see page 6-3.

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm