EasyManuals Logo

Toshiba B-FV4 Series User Manual

Toshiba B-FV4 Series
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #153 background imageLoading...
Page #153 background image
7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-19
Property Name Description
ANY It uses a 128-bit anycast address that you specify.
The printer needs to remember that the current address is an
anycast address, since its format is the same as a unicast
address.
IP Address (IPv6) The static IPv6 address of your printer.
Interface ID Short for interface identifier. It is used to identify the network
interface of a host. You can specify the interface ID here.
IP Address (Current IPv6) The current IPv6 address of your printer.
Link-Local Address It is used for communications on a local network. The
address always starts with FE80.
Setting up IPv6 Connection
Before you set up IPv6, make sure your have IPv6 connectivity.
1. Do one of the following to configure your IPv6 settings:
If you have a static IPv6 address, in the Mode list, click MANUAL; in the IP Address box, enter
your IPv6 address, and click Send.
If you don’t have a static IP address, in the Mode list, click DHCPv6; in the Address Type list,
click Normal, and click Send.

Table of Contents

Other manuals for Toshiba B-FV4 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba B-FV4 Series and is the answer not in the manual?

Toshiba B-FV4 Series Specifications

General IconGeneral
Resolution203 dpi
Print MethodThermal Transfer / Direct Thermal
2D CodesData Matrix, PDF417, QR Code, Maxi Code
Operating Temperature5 – 40 °C
Storage Temperature-20 – 60 °C
Power Supply100-240 VAC, 50/60 Hz
InterfacesUSB, Serial (RS-232)
Media Width25.4 – 112 mm

Related product manuals