Toshiba B-FV4 Series User Manual

3. REPLACING THE IMPORTANT PARTS EO18-33030
3.3 Replacing the Parts for B-FV4D-GH
3-28
3.3 Replacing the Parts for B-FV4D-GH/GL
3.3.1 Replacing the Top Cover
1. Open the top cover while pulling the lock release portions as indicated by the arrows.
[B-FV4D-GH] [B-FV4D-GL]
2. Use a Phillips screwdriver to remove the 4 screws.
3. Disconnect the harness from the panel board to take off the top cover.
4. Replace the top cover with a new one and then reassemble it in the reverse order of removal order of
removal.
Lock Release Portion
Top Cover
Top Cover
Harness
Panel Board
Screw
Screw
Screw
Screw
Top Cover
Lock Release Portion

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm