6. SYSTEM MODE EO18-33030
6.3 TPCL Auto Call Cancellation / 6.4 BASIC Interpreter Disable
6-5
6.3 TPCL Auto Call Cancellation
TPCL Auto Call allows you to print the file you saved in your printer's memory once your printer is turned on.
If you want to print many labels that share the same format, you can use TPCL commands to save the label
format, fill data into the fields in the format and enable TPCL Auto Call. You can save up to 99 format files,
but TPCL Auto Call always calls the file "01".
To cancel TPCL Auto Call:
1. Turn off the printer.
2. Press and hold the [FEED] button while turning on the printer.
3. Both status lights (LED 1 and LED 2) will light up in the following order:
Orange Green Other colour sequences
4. Release the [FEED] button when LED 1 turns to red and LED2 turns to orange.
5. Press the [FEED] button. The cancellation is done while LED 2 goes out and LED 1 turns to solid
green.
6.4 BASIC Interpreter Disable
BASIC interpreter converts BASIC programs to TPCL commands for printing, allowing you to create a more
flexible printing environment by using BASIC programs.
To disable BASIC interpreter:
1. Turn off the printer.
2. Press and hold the [FEED] button while turning on the printer.
3. Both status lights (LED 1 and LED 2) will light up in the following order:
Orange Green Other colour sequences
4. Release the [FEED] button when LED 1 turns to orange and LED2 turns to red.
5. Press the [FEED] button. The BASIC interpreter is disabled while LED 2 goes out and LED 1 turns
to solid green.
To Next Page
Loading...
Need help?
General
