1. OUTLINE EO18-33030
1.3 Specifications
1-15
1.3.4 Wireless LAN
Properties Wireless LAN I/F
Hardware
Protocol IEEE 802.11 b/g
Enabled Device B-FV4 Series
Operating Temperature +5°C ~ +40°C
Destination USA Europe
Frequency
(Center Channel)
2412 ~ 2462 MHz 2412 ~ 2472 MHz
Channel 1 ~ 11 ch 1 ~ 13 ch
Spacing 5 MHz
Transmission Speed/
Modulation
IEEE
802.11b
Transmission
Method
Conforming to IEEE 802.11b
DSSS method
Channel
Depending on the
country/region
Data Transmission
Speed/Modulation
11/5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
IEEE
802.11g
Transmission
Method
Conforming to IEEE 802.11g
OFDM method
DSSS method
Channel Depending on the
country/region
Data Transmission
Speed/Modulation
54/48 Mbps: 64 QAM
36/24 Mbps: 16 QAM
18/12 Mbps: QPSK
9/6 Mbps: BPSK
IEEE
802.11n
Transmission
Method
N/A
Channel
N/A
Data Transmission
Speed/Modulation
N/A
Antenna External antenna
Aerial power 802.11b 10 dBm Max
802.11g 10 dBm Max
802.11n N/A
Software Connection mode Infrastructure, Adhoc
Default IP Address 192.168.xxx.yyy Set the printer ID for xxx.yyy.
Default Subnet Mask
255.255.0.0
Default ESSID
TOSHIBATEC
Security
IEEE 802.11i
Cryptography
WEP 128 bit, TKIP (WPA), AES (WPA2)
Authorization
Open Key (for WEP), PSK
Protocol
TCP/IP, Socket, DHCP
Wireless LAN Parameter
Setting and Status
Monitor
Parameter Setting: Command (PC Setting Tool)