Need help?Do you have a question about the Toshiba B-EV4D SERIES and is the answer not in the manual?
General| Print Method | Thermal Transfer/Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Print Width | 104 mm |
| Print Speed | 4 ips (inches per second) |
| Interfaces | USB, Serial, Ethernet |
| Memory | 32 MB SDRAM |
| Barcodes | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13 |
| 2D Codes | Data Matrix, PDF417, QR Code, MaxiCode |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Product compliance with EMC, Low Voltage Directives, and FCC Rules.
EU directive for waste electrical and electronic equipment (WEEE).
Explains warning, prohibited, and mandatory action symbols used in the manual.
Highlights risks like death or serious injury from improper handling.
Details safe operating conditions, handling advice, and cleaning.
Advises on regular cleaning, preventive maintenance, and using chemicals.
Specifies requirements for interface cables to prevent noise.
Details the pin configuration for RS-232C serial connection.
Definitions of technical terms used in the manual.
Welcomes the user and explains the manual's purpose.
Lists the printer's main features: interface, mechanism, and options.
Instructions for unpacking and checking supplied accessories.
Guidance on selecting and purchasing an approved power cord.
Provides printer dimensions and illustrates front/rear views.
Shows and labels internal parts like print head, platen, and sensors.
Explains the operation of the FEED/PAUSE button.
Details the meaning of different colors and flashing patterns of the indicator lamp.
Advises on environmental conditions and static discharge prevention.
Outlines the sequence of steps for setting up the printer.
Instructions on how to power on the printer.
Instructions on how to safely power off the printer.
Details serial, parallel, Ethernet, and USB connection possibilities.
Steps to connect the power adapter and power cord to the printer.
Instructions for safely opening and closing the printer's top cover.
Steps for loading label rolls, tag rolls, and fanfold paper.
Adjusting media holders and guides for proper media feeding.
Adjusting media sensors for accurate detection.
Steps to close the cover and check media feed.
Instructions for loading media when using the strip mode option.
Instructions for cut mode and loading fanfold paper.
Steps to calibrate the Feed Gap/Black Mark Sensor.
Detailed steps for selecting sensor type and performing calibration.
Instructions to initiate a self-print test and enter dump mode.
Explains commands and parameters affecting test print contents.
Instructions for inserting and removing SD cards safely.
General advice on cleaning the printer.
Steps for cleaning the printer's print head element.
Instructions for cleaning platen, sensors, and covers.
Steps for cleaning the media housing area.
Cleaning procedure for optional strip sensor and roller.
Advises on proper storage and handling of printing media.
Guide to resolve common printer issues based on symptoms.
Explains printer status based on indicator lamp color and flashing.
Detailed steps to safely remove jammed media.
Technical specifications for the B-EV4D-GS14-QM-R model.
Specifications for optional modules like AC Adapter Cover and Cutter.
Information on approved media types and their usage.
Table detailing media width, pitch, and length for different modes.
Defines the area for the reflective sensor to detect black marks.
Illustrates the relationship between media width and print head width.
Notes on printing within specified margins and print quality factors.
Specifies requirements for interface cables to prevent noise.
Details the pin configuration for RS-232C serial connection.
Definitions for Bar Code, Batch Mode, Black Mark, Cut Mode, etc.
Definitions for Supply, Tag, and Thermal Print Head.
To Next Page