7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-31
3. In the BASIC Data File list, select the file you want to use. You can select multiple files at a time.
4. Click Send to store the files.
Important Only one BASIC main program can be stored in your printer. Each time
you store a main program, it overwrites the previous one.
General
The General tab displays in both ZPL and TPCL mode. It is used to send command files to your
printer and perform tasks. Remember that ZPL commands only run in ZPL mode, and TPCL
commands only run in TPCL mode.
To print the output of the command:
1. Type your commands in any text editor, such as Notepad or Wordpad.
2. Save your commands as text files (.txt).
3. In the Input/Output Port list, click the port you want to use.
To Next Page
Loading...
