Need help?Do you have a question about the Toshiba BA400 Series and is the answer not in the manual?
General| Print Speed | Up to 5 ips (127 mm/sec) |
|---|---|
| Media Width | 0.87” – 4.49” (22 mm – 114 mm) |
| Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 85% (non-condensing) |
| Drop Specification | 1.5m |
This mode is mainly used by users (operators). The label or tag can be issued in the online mode.
Threshold setting mode is provided to correct a print failure with pre-printed media.
In the RFID calibration mode, the distance to the optimum write/read position and AGC value...
In the information mode, the total feed amount counted during feed and printing operations is displayed...
The user system mode is accessible from the online mode. This mode contains the menus which might be frequently changed...
This mode is mainly used by service persons or the production department staff for adjustment of the printer before shipment.
This mode is used to download boot and main programs firmware.
In this mode, the printer firmware is automatically updated with the program stored in a USB memory.
Details on the keys and their functions within the Online Mode Screen.
Describes the functions of the [FEED], [RESTART], and [PAUSE] keys in the Online Mode Screen.
Explanation of the function and behavior of the ONLINE and ERROR LEDs.
Description of the LCD display capabilities, size, and structure.
Details on the displays shown in the Online Mode Screen and their components.
Explanation and transition examples for the help screen functionality.
Outline of how to manually set the threshold for print position correction.
Explains the components and functionality of list boxes with scrollbars in the UI.
Describes the screen used for setting values by increasing or decreasing them.
Details the information screen displayed when no settings are configured.
Procedure for adjusting media sensors when their levels require adjustment.
Screen used for displaying print head and ambient temperatures.
Details how to enter and the purpose of the System Mode.
Explains when configured settings in system or user mode are saved to the printer.
Procedure to reset the printer to its default state.
Information on performing self-diagnostics, including maintenance counters and auto-diagnostics.
Details on the menu structure and operation of the maintenance counter.
Details how to enter and the purpose of the User System Mode.
Procedure to exit the User System Mode and return to online mode.
Allows setting various parameters for printer functions, similar to System Mode.
Used to set the threshold value for media detection.
Tools for printing data or storing it in USB memory.
Prints or saves received data of each interface to a USB memory.
Log data can be saved to USB memory for printer and sensor information.
Used to set issue control items like sensor type, print speed, and ribbon.
Displays current setting values for various parameters.
Resets the printer, returning it to a default state.
Explains the auto configuration mode for firmware download and printer restart.
Details the necessary files and preparation steps for USB memory for auto configuration.
Information on the format, model information, display message, and firmware files for auto configuration.
Describes the printer statuses that trigger entry into power save mode.
Lists the conditions under which the printer exits the power save mode.
Explains how the printer displays and operates during power save mode.
Details the status of the ONLINE and ERROR LEDs during power save mode.
Shows the messages displayed in power save mode based on printer status and language.
To Next Page