Toshiba BA400 Series - Rear Ribbon Motor; Peel off Torque

91
8.5.33 REAR RIBBON MOTOR
The menu structure of REAR RIBBON MOTOR menu
Menu item
<2>SET PARAMETERS
REAR RIBBON MOTOR
Normal Torque
Low Torque
8.5.33.1. Normal Torque
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+10
-15
1
Decimal
Exist
2
0
None
Step
Notes:
1. The fine adjustment value is not effective for the reverse rotation.
2. The back tension side is applicable at all speeds.
fine adjustment
value
Scope of application
+10 ～ -15
all speed
3. The ribbon motor torque fine adjustment value is the sum of the fine adjustment values set in the system
mode (by key operation) and set by command (from the PC). The max. value is -15 or +10.
8.5.33.2. Low Torque
Max.
value
Min. value
Step
Display
Sign
Integer
digit
Decimal
place
0-padding
Unit of
measure
+10
-15
1
Decimal
Exist
2
0
None
Step
Notes:
1. The fine adjustment value is not effective for the reverse rotation.
2. The back tension side is applicable at all speeds.
fine adjustment
value
Scope of application
+10 ～ -15
all speed
3. The ribbon motor torque fine adjustment value is the sum of the fine adjustment values set in the system
mode (by key operation) and set by command (from the PC). The max. value is -15 or +10.
8.5.34 PEEL OFF TORQUE
R0: R0 (weak)
R1: ↑
R2: ↓
R3: R3(Strong)