Toshiba BA400 Series - Key Test

134
8.12.2 KEY TEST
The test is performed in the following order.
(Start)  FEED key test  RESTART key test  PAUSE key test  (End)
The display language is English regardless of the LCD Language parameter setting.
LCD
Operation and LCD/LED status
FEED KEY TEST
Press the [FEED] key.
RESTART KEY TEST
Press the [RESTART] key.
PAUSE KEY TEST
Press the [PAUSE] key.
END DISPLAY
Press the [PAUSE] key to return to the
upper-level menu.
Notes:
1. If a key other than designated is pressed, the printer waits until the designated key is pressed. (The test
does not proceed to the next.)
2. If the key test does not proceed to the next test even after the designated key is pressed, the key may
be broken. In this case, turn off the printer.