(2) Turn the power on while holding down the [FEED], [RESTART]
and [PAUSE] keys at the same time.
(3) Download mode display
(4) Send a download command.
(5) The printer starts receiving the data.
(6) The printer is receiving the data
(7) Data is being checked.
(8) Data is being checked.
(9) The flash ROM is being erased.
(10) Downloaded data is being written.
(11) Downloading is completed.
(12) After downloading is completed, the printer will be
automatically restarted, and placed in the online state.
To Next Page
Loading...
