Toshiba BA400 Series - 9.9 Show Issue Condition; Auto Configuration Mode; 11.1 Outline of the Auto Configuration Mode; 11.2 Preparation for USB Memory

143
ON
[Explanation]
The issue control setting affects only TPCL mode.
9.9 SHOW ISSUE CONDITION
Contents of SHOW ISSUE CONDITION menu
Menu item
<6>SHOW ISSUE CONDITION
Sensor (*1)
Mode (*1)
Print speed (*1)
Ribbon (*1)
Direction (*1)
Media pitch (*1)
Print length (*1)
Print width (*1)
Media width (*1)
Notes:
The current setting value for each parameter is shown in the position of (*1). The options for the parameters
are as follows.
Sensor
BA400 ~ V1.1
NO
REFLECTIVE
TRANSMISSIVE
BA400 V1.2 ~
NO
REFLECTIVE
TRANSMISSIVE
TR.Threshold1
TR.Threshold2
TR.Threshold3
TR.Threshold4
TR.Threshold5
RE.Threshold1
RE.Threshold2
RE.Threshold3
RE.Threshold4
RE.Threshold5
Mode
BATCH
CUT (yyy) * yyy: Cut interval (1 to 100)
PEEL OFF
PEEL OFF (Appl)
Print speed
* Selectable print speed differs depending on the model.
2ips
4ips
6ips
8ips