Toshiba BA400 Series - Set Parameters

72
8.5 SET PARAMETERS
Contents of the SET PARAMETERS menu
Menu item
<2>SET PARAMETERS
MEDIA LOAD
FEED KEY
MOVE TO TEAROFF
FW/BK ACT.
PRE PEEL OFF
BACK FEED SPEED
AUTO HEAD CHECK
RIBBON NEAR END
PAPER/RBN END
CALIBRATE
POWER SAVE TIME
CODE PAGE
ZERO FONT
CTRL CODE
PEEL OFF STATUS
KANJI CODE
EURO CODE
MAXICODE SPEC
CUT MODE
MULTI LABEL
FEED LENGTH
TOTAL LENGTH
FEED ADJ.
CUT ADJ.
BACK ADJ.
X ADJUST
X ADJ. METHOD
HEAT ENERGY TYPE
TONE ADJ.<T>
TONE ADJ.<D>
RIBBON TORQUE
FRONT RIBBON MOTOR
REAR RIBBON MOTOR
PEEL OFF TORQUE