Toshiba BA400 Series - 6.2 LED Function; 6.3 LCD Function

8
6.1.2 Help Screen
Key
Function
[FEED]
(1) Return the page to the previous help message.
(2) Ends help message screen.
[RESTART]
(1) Ends help message screen and restart.
[PAUSE]
(1) Advance page to next help message.
(2) Ends help message screen.
6.1.3 Manual Threshold Setting Screen
Key
Function
[FEED]
(1) Moves the cursor upward.
(2) Re-sets.
(3) Scroll down in explanation Process.
(4) Moves detection result.
[RESTART]
(1) Moves the cursor downward.
(2) Scroll up in explanation Process.
(3) Finish the threshold setting.
[PAUSE]
(1) Do threshold setting.
(2) Choose the setting.
(3) Move to detail display.
(4) Move to adjustment setting.
6.2 LED FUNCTION
[ONLINE] LED
Indicates that the printer is in online state.
Flashes when the printer is communicating with the host.
Flashes (ON: 250ms. OFF: 250ms.) in synchronization with the ERROR LED when
the printer is turned off.
Flashes in the power save mode (ON: 1 sec., OFF: 1 sec.) (Note)
[ERROR] LED
Indicates that the printer is in error state.
Flashes when a ribbon near end condition is detected (at a 1-second interval (ON:
500ms. OFF: 500ms.)
However, it flashes in synchronization with the ON LINE LED during communication.
Flashes when a system error occurs (ON: 500ms. OFF: 500ms.)
Flashes (ON: 250ms. OFF: 250ms.) in synchronization with the ONLINE LED when
the printer is turned off.
Note: If the wireless LAN is being linked when the printer is off, both the ONLINE and ERROR LED just turns
on, not flash.
6.3 LCD FUNCTION
The LCD displays the messages which indicate the printer status.
LCD
Type
Graphics LCD
Size
128 dots (W) x 64 dots (H)
Display structure
Maximum of 21 digits x 5 lines