9
6.4 ONLINE MODE SCREEN
When the power switch is pushed in, the LCD backlight turns on. When the entire LCD glows, release the
power switch.
After about 3 seconds, the following display appears. After that, when the startup process is complete, the
display will be online.
6.4.1 Online Mode Screen Example
← Model name, Firmware version (*5)
← The number of labels printed (*1)
← The number of remaining labels to print (*2)
← 1
st
line of the error message
← 2
nd
line of the error message (*6)
(TO DO) 123
Close the print
head block.
Help▶
← The number of remaining labels to print (*2)
← 1
st
line of the error message
← 2
nd
line of the error message