Toshiba BA400 Series - 9.3 Set Parameters; 9.4 Detection Level; 9.5 System Tools

140
9.3 SET PARAMETERS
Same as 8.5 SET PARAMETERS of the system mode.
9.4 DETECTION LEVEL
Contents of DETECTION LEVEL menu
Menu item
<3>DETECTION LEVEL
1)REFL.(PRE-PRINT)
2)TRANS.(PRE-PRINT)
Same as 6.6 MANUAL THRESHOLD SETTING.
9.5 SYSTEM TOOLS
Menu item
<4>SYSTEM TOOLS
DUMP
USB
USB MEMORY
PRINT *1
ON DEMAND
ALL
LAN/WLAN  The subsequent menus are same as *1.
BLUETOOTH  The subsequent menus are same as *1.
RS-232C  The subsequent menus are same as *1.
CENTRONICS  The subsequent menus are same as *1.
RFID  The subsequent menus are same as *1.
BASIC1  The subsequent menus are same as *1.
BASIC2  The subsequent menus are same as *1.
LOG
PRINTER TO USB
CANCEL
OK
This menu is available to get received Buffer contents of each interface.
[The method of getting data]
1. As printing
2. Saving to USB Memory