What to do if I cannot log in to Toshiba Remote Control Software?
If you cannot log in to the Toshiba Remote Control Software, remember that each user can only log in from one PC at a time. Also, select a display style other than classic style by going to [Start] - [Control Panel] - [Appearance and Personalization] - [Change the theme]. The supported operating systems of this software are Windows 10 and Windows 11.
How to fix Toshiba Remote Control Software if I cannot start it?
If you cannot start the Remote Control Software, it could be due to several reasons. If "Error 1001" is displayed, download and install .Net Framework 4.6.2 from the software's download website. Ensure the LAN cable is connected and network settings are correct. Verify that the IP address of the access destination is set to the IP address of the controller main unit, not the PC. Also, confirm that the PC on which the software was installed is running Windows 10, as other operating systems may not be supported.
What to do if the Toshiba BMS-CT1280TU Controller LCD does not display?
If the LCD on your Toshiba Controller does not display, check whether the power is turned off by the breaker. Also, check that the wiring of the power outlet and AC adapter is not disconnected. Confirm that the green LED at the lower rear of the main unit and the green LED on the AC adapter are lit, indicating power is being supplied.
Why Toshiba BMS-CT1280TU Controller schedule does not work?
If the schedule on your Toshiba Controller is not working, check if the schedule is disabled in the Scheduler Operation settings.
Why Toshiba BMS-CT1280TU LCD does not turn off?
The LCD will still be on when a check code has been detected. Erase the check code.
How to fix language switch issue with Toshiba Remote Control Software?
If the language does not switch with the Remote Control Software, ensure that the login user for the Windows being used has write permission for the Remote Control Software storage location. Allow write permission below the folder where Remote Control Software is saved (initial setting: C:\Program Files\TOSHIBA Carrier Corporation). Right-click on the TOSHIBA Carrier Corporation folder, select the [Properties] - [Security] Name, click the "Edit" button and check [Allow] for [Full control] under different settings.
How to reboot Toshiba BMS-CT1280TU?
To reboot your Toshiba Controller, select [Menu]-[Functions]-[System reboot].
How to turn off Toshiba BMS-CT1280TU?
To turn off the power on your Toshiba Controller, select [Menu]-[Functions]-[shut down].
How to fix Toshiba Remote Control Software not starting?
If the Toshiba Remote Control Software won't start, download and install .Net Framework 4.8 from the software's download website. Ensure that your PC and the LAN of the Unit are connected properly by checking the LAN cable and network settings. The IP address to enter during installation should be the IP address of the controller main unit, not the PC's IP address. Also, confirm that your operating system is Windows 10 or Windows 11, as other OS versions may not be supported.
Why Toshiba air conditioner doesn't cool or heat?
If your Toshiba air conditioner isn't cooling or heating, it might be due to demand control or power saving settings, which reduce the outdoor unit's capacity to lower power consumption, potentially increasing the time to reach the set temperature. Additionally, forced thermo OFF stops the outdoor unit's operation, causing the indoor unit to function only as a fan.
General| Category | Controller |
|---|---|
| Model | BMS-CT1280TU |
| Manufacturer | Toshiba |
| Analog Sticks | No |
| Vibration Feedback | No |
| Wireless | No |
| Compatibility | Toshiba Air Conditioners |
To Next Page
