Why does media jamming occur right after printing starts on my Toshiba Barcode Reader?
If your Toshiba Barcode Reader is experiencing media jams immediately after printing starts, it might be because the printer was left unused for an extended period. To prevent this, if the printer will not be used for a long time, pull the lock release lever toward you to unlock the top cover. This releases pressure on the label.
Why does media jamming occur during continuous printing on my Toshiba Barcode Reader?
If media jamming occurs during continuous printing with your Toshiba Barcode Reader, it could be because the print head becomes warm, making it difficult for the label to separate from the platen roller. Try selecting a lower printing speed and increasing the printing interval.
Why are barcodes not readable on my Toshiba Barcode Reader?
If barcodes or 2D codes printed by your Toshiba Barcode Reader are not readable, it could be related to the paper characteristics. Try increasing the module size, selecting a lower printing speed, or changing the barcode print orientation. For ladder barcodes, rotate them to a picket fence barcode orientation (90 degrees). Also, check the scanner settings.
What to do if my Toshiba Barcode Reader is not printing?
If your Toshiba Barcode Reader is not printing anything, even when direct thermal mode is selected, ensure that you load direct thermal media. It is also possible the media is not loaded correctly, so try reloading it. Also, verify that the print data are being sent from the host computer.
What to do if media is not issued from my Toshiba Barcode Reader?
If media is not being issued from your Toshiba Barcode Reader, it may be due to a few reasons. First, ensure the media is loaded correctly. If the media is correctly loaded, check the interface cable to ensure it is correctly connected. Lastly, the media sensors may be dirty, so try cleaning them.
Why is my Toshiba Barcode Reader printing poorly?
If you're getting poor print quality from your Toshiba Barcode Reader, make sure you are using Toshiba Tec Corporation approved media. If not, replace the media with the approved type. Also, the print head may be dirty. In this case, you should clean the print head.
How to resolve missing dots on printouts from my Toshiba Barcode Reader?
If you observe missing dots in the printouts from your Toshiba Barcode Reader, it could be caused by a dirty print head. Clean the print head. Alternatively, some print head parts might be broken. If cleaning doesn't resolve the issue and the missing dots are affecting the printout, turn off the printer and contact your Toshiba Tec representative to replace the print head.
What to do if my Toshiba Barcode Reader is not cutting cleanly?
If your Toshiba Barcode Reader is not cutting the media cleanly, it is likely that the cutter blade has reached the end of its useful life. You should turn off the printer and contact your Toshiba Tec representative to replace the cutter blade.
Why am I getting a wireless LAN communication error on my Toshiba Barcode Reader after turning it on?
If a wireless LAN communication error occurs immediately after turning on your Toshiba Barcode Reader, it's likely because it takes about 10 seconds to enable wireless LAN communication while the ONLINE lamp is lighting. Turn on the printer and wait at least 10 seconds after the ONLINE lamp lights up before starting communication.
General| Brand | Toshiba |
|---|---|
| Model | BV420D-GL02-QM-S |
| Category | Barcode Reader |
| Language | English |
Details product compliance with applicable European Directives and UK legislations.
Covers FCC Class A notice for USA and ICES-003 for Canada regarding digital apparatus.
Informs about potential exposure to chemicals known to cause cancer in California.
Specifies requirements for using Korean standard power cords with the product.
Provides guidance on proper disposal and recycling of the product as WEEE for various regions.
States compliance with Turkish, Indian, Argentinian, and Vietnamese regulations for electronic products.
Lists official importers for EU, UK, and Turkey with their addresses and contact details.
Provides the address of the product's manufacturer, Toshiba Tec Corporation.
States product compliance with radio frequency and safety standards, and approved regions.
Advises on potential interference and best practices for wireless device operation.
Provides an overview of safety importance and explains warning/prohibition symbols.
Details warnings related to voltage, wet hands, shared outlets, and foreign objects causing shock or fire.
Covers safe handling of power cables, grounding, and prohibition of disassembly.
Discusses precautions for operating environment, cleaning, and maintenance safety.
Introduces the printer, lists features, and provides unpacking instructions.
Guides on how to select an approved power cable for different regions and voltage requirements.
Illustrates and identifies the external components of the printer's front and rear.
Shows and names the internal parts of the printer.
Advises on precautions to ensure safe and correct printer setup and operation.
Outlines the step-by-step procedure for setting up the printer for operation.
Explains how to connect serial, Ethernet, and USB communication cables to the printer.
Details the procedure for connecting the AC adapter and power cable to the printer.
Describes the process of powering the printer on and checking status lamps.
Explains the procedure for safely turning the printer off.
Provides instructions on how to open the printer's top cover safely.
Details the procedure for closing the printer's top cover securely.
Guides on how to load the media roll into the printer correctly.
Explains how to clean the printer's print head for optimal performance and longevity.
Details the process for cleaning the media sensors to ensure accurate detection.
Explains how to clean the platen roller for proper media feeding and print quality.
Provides instructions on cleaning the printer's media housing and maintaining the cutter.
Offers guidelines on storing and handling media to ensure print quality and prevent damage.
Lists common printer problems, their causes, and step-by-step solutions.
Explains the meaning of different LED status lamp combinations for diagnosing issues.
Provides step-by-step instructions for safely removing jammed media from the printer.
Lists detailed technical specifications for the printer model, including voltage, power, and dimensions.
Details the optional interface kits and accessories available for the printer.
Specifies the dimensions, types, and characteristics of compatible printing media for the printer.
To Next Page