To Next Page
S
Steven Peters IIJul 25, 2025
What to do if the POWER lamp of Toshiba BV420D-GS02-QM-S Barcode Reader does not light?
- LLauren HunterJul 26, 2025
If the Toshiba Barcode Reader's POWER lamp doesn't light up when you press the power button, there might be several reasons. First, ensure the power cable is correctly connected to both the AC adapter and the AC outlet. If it's still not working, test the AC outlet with another appliance to rule out a power failure. Also, check the building's fuse or circuit breaker. Finally, verify that the AC adapter connector is securely connected to the power jack.
General
