Need help?Do you have a question about the Toshiba B-SX8T SERIES and is the answer not in the manual?
General| Type | Industrial Barcode Printer |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| Interfaces | USB, Serial, Ethernet, Parallel |
| Memory | 16 MB Flash |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 5°C to 40°C |
| Resolution | 203 dpi |
Provides an overview of the TOSHIBA B-SX8T series thermal printer and its manual.
Details the printer's various interface options, superior hardware, and heavy-duty enclosure.
Lists all accessories that should be supplied with the printer upon unpacking.
Illustrates the printer's external parts, dimensions, front, and rear views.
Describes optional modules and boards that can be added to the printer.
Covers precautions and steps for safely installing the printer in its operating environment.
Step-by-step guide on how to assemble and attach the supply holder frame.
Instructions on how to safely connect the power cord to the printer and an outlet.
Detailed procedure for loading label or tag media into the printer.
Instructions for properly loading a ribbon for thermal transfer printing.
Outlines methods for connecting the printer to a host computer via various interfaces.
Steps to turn on the printer and verify its operational status.
Guide to setting printer parameters and entering system mode for customization.
Detailed list and explanation of various printer parameters that can be configured.
Explains how to use dump mode for verifying programming commands or debugging.
Instructions on how to execute BASIC expansion mode programs.
Procedure for setting up automatic calibration for print start position detection.
Steps to enable or disable LAN communication and SNMP settings.
Guide for setting the date, time, and battery check for the optional Real Time Clock.
Procedure for setting IP address, gateway, subnet mask, and other network parameters.
Instructions for installing TOSHIBA printer drivers on Windows host computers.
Steps to remove installed printer drivers from Windows 98/ME and 2000/XP.
Procedure for adding and deleting LAN ports for network printing.
Guidance on how to access and use the printer driver's help features.
Instructions on how to perform a print test and confirm results.
Detailed guide for adjusting print start position, tone, and other fine-tuning parameters.
Procedure for setting automatic and manual threshold values for media detection.
Explains the functions of LEDs, buttons, and the LCD message display on the printer's control panel.
Describes how the printer operates in online mode, including handling errors and pauses.
Procedure for clearing print data and returning the printer to an idle state.
Guides on regular cleaning to maintain printer performance and print quality.
Step-by-step instructions for cleaning the print head and platen components.
Detailed procedure for removing and cleaning the pinch roller.
Instructions for cleaning the area under the media guides.
Guidelines for cleaning the external covers and panels of the printer.
Procedure for cleaning the cutter unit and its blade.
Instructions for cleaning the backing paper holder and strip roller.
Lists common error messages, their causes, and suggested solutions.
Addresses typical issues like printer not turning on or media feeding problems.
Detailed steps for safely removing jammed media from the printer.
Provides technical details including dimensions, weight, power, resolution, and speed.
Lists available bar code types, fonts, interfaces, and optional equipment.
Details media types, pitch, length, width, and other specifications.
Information on ribbon types, recommended media-ribbon combinations, and care instructions.
Explains the meaning of LCD messages and LED indications for printer status and errors.
Describes the Centronics interface, modes, control signals, and data input codes.
Details the USB interface standard, transfer type, rate, class, and connector.
Provides information on the LAN interface standard, connector, LED status, and cable requirements.
Describes the RS-232C serial interface, communication modes, and data input codes.
Information on wireless LAN standards, protocols, security, and settings.
Specifies input/output signals, connectors, and circuits for the expansion I/O interface.
Lists certification marks for various countries and power cord type recommendations.
Displays samples of various fonts available for printing.
Illustrates various types of bar codes that can be printed by the B-SX8T series.
Defines key terms and concepts related to the printer, its operation, and specifications.
An alphabetical listing of topics covered in the manual with corresponding page numbers.
To Next Page