Toshiba B-SV4T User Manual (English)

Questions and Answers:

B
brianna17Aug 7, 2025
What to do if the Error Indicator Lamp (red) is flashing on my Toshiba Barcode Reader?
- C
  Charles RussellAug 7, 2025
  If the Error Indicator Lamp (red) is flashing on your Toshiba Barcode Reader, it could indicate several issues: 1. The media has run out, so install a new media roll. 2. The Media Sensor cannot detect the print start position, so retry the Media Sensor calibration. 3. A paper jam occurred. 4. The ribbon has run out, so install a new ribbon roll. 5. The ribbon has been torn, so check the status of the ribbon and replace it if necessary. 6. A cutter jam occurred. After resolving these potential problems, press the FEED/PAUSE Button to return to the Online state.
T
Timothy PowellAug 13, 2025
How to fix poor print quality on a Toshiba Barcode Reader?
- D
  douglassandersAug 13, 2025
  Poor print quality on your Toshiba Barcode Reader can be caused by a few things: 1. The top cover might not be completely closed, so ensure it is. 2. The print head may need cleaning. 3. The media or ribbon being used might not meet the specifications. Use only TOSHIBA TEC recommended media.
M
Megan ClarkAug 20, 2025
What to do if the Error Indicator Lamp (red) is illuminated (not flashing) on my Toshiba Barcode Reader?
- B
  Brandi MasonAug 20, 2025
  If the Error Indicator Lamp (red) is illuminated but not flashing on your Toshiba Barcode Reader, it means that the top cover is not closed completely. Make sure to close the top cover completely and confirm that the indicator lamp flashes. Then, press the FEED/PAUSE button to return to the Online state.
J
Jodi GarciaAug 26, 2025
Why is the Online Indicator Lamp (green) flashing on my Toshiba Barcode Reader?
- D
  Daniel ChurchAug 26, 2025
  If the Online Indicator Lamp (green) is flashing on your Toshiba Barcode Reader, the printer is in PAUSE state. Press the FEED/PAUSE Button to return to the Online state.
J
jared45Aug 31, 2025
How to fix a Toshiba Barcode Reader when the Online Indicator Lamp (green) is not illuminated?
- A
  Alex WardAug 31, 2025
  If the Online Indicator Lamp (green) is not illuminated on your Toshiba Barcode Reader: 1. Check that the power cord is properly connected. 2. If the LED on the AC Adapter is not illuminated, please contact an authorised TOSHIBA TEC service representative.

Toshiba B-SV4T Specifications

General

Brand	Toshiba
Model	B-SV4T
Category	Barcode Reader
Language	English

Summary

CE Compliance and Regulatory Information

FCC and IC Compliance

Details compliance with FCC Part 15 and Canadian Interference-Causing Equipment Regulations.

AC Adapter Requirements

Specifies the exclusive use of the EA10953 AC adapter for the B-SV4T Series printer.

Waste Recycling Information

Provides guidance on proper disposal and recycling for EU member states.

Safety Precautions and Symbols

Understanding Safety Symbols

Explains the meaning of warning, prohibited, and required action symbols used in the manual.

Electrical Safety and Handling Precautions

Details crucial safety measures for electrical connections, handling, and potential hazards.

General Precautions for Printer Operation

Operating Environment and Handling

Guidelines for optimal operating environment, static control, media/ribbon storage, and general handling.

Maintenance and Care Guidelines

Information on routine maintenance, cleaning, and contacting service representatives for assistance.

Product Overview

Introduction to the B-SV4T Series Printer

Welcome message and overview of the manual's purpose for gaining maximum performance.

Key Printer Features

Highlights the printer's capabilities, including processor, interface, design, and barcode support.

Standard Accessories and Power Cord Selection

Lists included accessories and provides guidance on selecting the correct power cord for different regions.

Printer Appearance and Components

Physical Dimensions

Details the printer's physical dimensions in millimeters and inches.

Front and Rear Views

Identifies external components and ports visible from the front and rear of the printer.

Internal Components and Controls

Explains the interior parts, buttons, and indicator lamp functions.

Printer Setup Procedures

Setup Precautions

Essential safety and environmental guidelines to follow before setting up the printer.

Initial Setup Steps

Outlines the sequence of actions from unpacking to driver installation.

Turning the Printer On and Off

Instructions on how to safely power the printer on and off using the power switch.

Connecting Interface Cables

Details how to connect serial, parallel, or USB cables to the printer and host computer.

Connecting Power Adapter and Cord

Step-by-step guide for connecting the power adapter and power cord to the printer.

Opening and Closing the Top Cover

Instructions on how to safely open and close the printer's top cover, including warnings.

Loading Media and Ribbon

Loading the Media Roll

Detailed steps for loading various types of media rolls, including warnings and cautions.

Media Sensor Adjustment and Issue Modes

Guide to adjusting media sensors and understanding available issue modes like Batch mode.

Setting Up Strip Mode

Instructions for configuring the printer for strip mode operation, including label separation.

Setting Up Cut Mode

Instructions for using the cutter option to automatically cut media after printing.

Using the External Media Roll Hanger

Guide for attaching and using the optional external media roll hanger for larger rolls.

Loading the Ribbon

Step-by-step instructions for installing the ribbon correctly for thermal transfer printing.

Utilities and Calibration

Media Sensor Calibration

Procedure for calibrating the Feed Gap and Black Mark sensors for accurate media detection.

Self Print Test and Dump Mode

How to perform a self print test and enter dump mode for diagnostics and status.

Understanding Test Print Samples

Explains the content of test prints and related commands for configuration.

Printer Maintenance

Routine Cleaning Procedures

Guidelines for regular cleaning to maintain print quality and printer performance.

Cleaning the Print Head

Detailed instructions on safely cleaning the printer's print head element.

Cleaning Platen, Sensors, and Cover

Instructions for cleaning the platen, various sensors, and the printer's outer cover.

Media and Ribbon Care and Handling

Proper handling and storage guidelines for media and ribbons to ensure quality and longevity.

Troubleshooting and Error Resolution

Troubleshooting Guide

Lists common problems, their causes, and solutions, including indicator lamp status.

Removing Jammed Media

Step-by-step instructions for safely removing jammed media without damaging the printer.

Technical Specifications

Printer Specifications

Detailed technical specifications including voltage, power, operating ranges, resolution, and interfaces.

Optional Accessories

Lists available optional modules and accessories like keyboard display, cutter, and LAN adapter.

Media Specifications and Types

Details media requirements, types, and approved usage for optimal print quality.

Transmissive Sensor Detection Area

Specifies the detection range of the transmissive sensor for gap detection between labels.

Reflective Sensor Detection Area

Details the detection range of the reflective sensor for black mark and hole detection.

Effective Print Area and Ribbon Specifications

Defines the printable area on media and specifies ribbon characteristics for optimal use.

Interface and Connectivity

Interface Cable Requirements

Guidelines for interface cables to prevent noise and ensure proper connectivity.

RS-232C Cable Description

Details the pinout and specifications for RS-232C serial cables connecting to the printer.

Glossary of Terms

Key Printing and Media Terms

Definitions for terms related to printing methods, media types, and print speed.

Sensor and Component Definitions

Explanations of sensors, print head elements, and operational modes like batch and strip.

Additional Technical Terms

Definitions for terms such as supply, tag, thermal print head, and thermal transfer printing.

Index

Alphabetical Index of Topics

An alphabetical listing of topics and their corresponding page numbers for quick reference.

Related product manuals

Toshiba B-SV4T SERIES