2. PRINTER SETUP
ENGLISH VERSION EO1-33062
2.7 Loading the Media
E2-11
2.7 Loading the Media
(Cont.)
Cut mode (Option):
When the Cutter is installed, the media is automatically cut.
After loading the media as described on the previous pages, insert the
leading edge of the media through the Media Outlet of the Cutter Cover.
CAUTION
1. Be sure to cut the backing
paper of the label. Cutting
labels will cause the glue to
stick to the cutter which may
affect the cutter quality and
shorten the cutter life.
2. Use of tag paper of which
thickness exceeds the specified
value may affect the cutter life.
The cutter is sharp, so care must
be taken not to injure yourself
when handling the cutter.
WARNING
To Next Page
Loading...
Need help?
General
