40
Getting Started
Connecting to a power source
To connect AC power to the computer:
1 Connect the power cord/cable to the AC adaptor.
California Prop 65 Warning
This product contains chemicals, including lead, known to
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
2 Plug the AC adaptor cord into the DC-IN on the side of
the computer.
To locate your DC-IN port, please refer to your Quick
Start document.
3 Connect the power cord/cable to a live electrical outlet.
The AC power light on the indicator panel glows white.
Never attempt to connect or disconnect a power plug
with wet hands. Failure to follow this instruction could
result in an electric shock, possibly resulting in serious
injury.
The computer’s main battery light gives you an
indication of the main battery’s current charge:
❖ Glows amber while the main battery is being charged
(AC adaptor connected)
❖ Glows white when the main battery is fully charged
❖ Is unlit when the main battery has discharged, the
battery is not charging, or the AC adaptor is not
plugged into the computer or AC outlet
❖ Flashes amber when the main battery charge is low
and it is time to recharge the main battery or plug in
the AC adaptor
If the AC power light flashes amber during charging,
either the main battery is malfunctioning, or it is not
receiving correct input from the AC power supply.
NOTE
NOTE
To Next Page
Loading...
Need help?
General