Strata CTX DKT/IPT Telephone 06/03 87
Button Labels B
All Flexible Buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your CTX System Administrator for button assignments.
The button labels in Table 13 are for the Programmable Buttons on your telephone.
Programmable buttons are the unmarked buttons on your keystrip.
Table 13 Feature Button Definitions
Button Definitions
$FFRXQW
&RGH
Account Code – Press to enter a Voluntary Account Code anytime during a Central
Office (outside) line call without interrupting the conversation.
$OO&DOO
3DJH
All Call Voice Page – Press to page all of the telephones in the All Call Page group.
$XWR%XV\
5HGLDO
Automatic Busy Redial – Press to set up Automatic Busy Redial after receiving a busy
tone on a dialed outside line call (not available when calling on Tie or Direct Inward
Dialing (DID) outside lines).
$XWR
&DOOEDFN
Automatic Callback – Press to recall a busy station or station in the Do Not Disturb (Do
Not Disturb) mode as soon as that station becomes idle or deactivates Do Not Disturb.
Also used for outside line queuing when all lines are busy.
&DOO)UZG
$OO&DOOV
Call Forward-All Calls – Press to forward all calls to another station or voice mail
device.
&DOO)UZG
%XV\
Call Forward-Busy – Press to forward calls immediately to another station or voice mail
device when your station is busy or in the Do Not Disturb mode.
&DOO)UZG
%XV\1$QV
Call Forward-Busy/No Answer – Press to forward calls immediately to another station
or voice mail device when your station is busy or in Do Not Disturb mode. Also forwards
calls when your station is not answered after 8~60 seconds (set at your station).
To Next Page
Loading...
Need help?
General