Call Forwarding .
Call Forwarding allows you to forward calls to your office phone to an outside number.
To Program your Call Forwarding Button
1. Press the Intercom Key, Then # 9 8 7 6 . The phone will say “User Programing Mode”
2. Press the Call Forward key
3. Press 9, Type in the number you wish to forward to, press #
4. Press the Call Forward key again. The phone will say “Data Programed”
5.
Lift the handset and hang it back up again. Your phone will exit programing mode.
To Use the Call Forwarding Key
1. To enable call forwarding press the Call Forward button. The light next to the button will light red
when it is enabled. Your phone is now forwarding to the number you programed.
2. To disable call forwarding press the Call Forward button so the light goes out next to the button.
Notes about Call Forwarding
When your phone is forwarding to an external number your internal voicemail will not pickup. As an example lets
say your forwarding to your cell phone. When you get a call at your office phone it will forward to your cell phone
and your cell phone voicemail will be what answers if you do not pick up the call.
Depending on the system configuration the Caller ID of the forwarded call will appear to come from your office
phone system. If this is happening it is a limitation of the phone company and can not be changed.
10
To Previous Page
Loading...
Need help?
General