Call Transfer .
Simple Transfer (unsupervised)
1. While on a call, press “Cnf/Trn”.
2. Dial the extension number and the call is transferred and hand up.
Transfer with Announcing the call (supervised)
1. While on a call, press “Cnf/Trn”.
2. Dial the extension number who you want to transfer the call to. Stay on the line to announce the call.
If the party you are transferring to wants the call just hang up. If they do not want the call press the green
flashing line or intercom button to get the original caller back.
Call Parking .
To Park a Call
While on the call press "PARK" and then the EXTENSION of whom you wish to park it to.
Press "Page" and announce who the call is parked for and what extension you parked it on.
Hang up when you are done.
To Answer a Parked Call
A. If you are at the extension the call was parked to , Press the "PARK" key. You now have the call.
B. If you are at another phone, Press the “PARK” key, then dial the extension the call was parked to. You
now have the call.
Volume Control .
To adjust handset volume
1. During a call, press and hold “Vol” up or down. When you hang up, volume returns to a default
level.
To adjust the speaker volume for internal/external calls and background music
1. Press “Spkr” , press and hold “Vol” up or down to adjust volume level.
2. Press “Spkr” to exit.
To adjust Ring Tone volume
1. With an idle phone and handset on-hook, press and hold “Vol” until the ring volume is satisfactory
6
To Next Page
Loading...
Need help?
General