EasyManua.ls Logo

Toshiba Strata CTX100 - User Manual

Toshiba Strata CTX100
348 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
726+,%$ Telecommunication Systems Division
October 2002
CTX100 and CTX670
Installation and Maintenance
Manual
Digital Business Telephone Systems

Table of Contents

Other manuals for Toshiba Strata CTX100

Preview: General Description
General Description100 pages

Questions and Answers

  • M
    Megan CamposJul 29, 2025
    What to do if Toshiba Strata CTX100 shows TEST FAIL?
    • J
      Justin SharpJul 29, 2025
      If your Toshiba Telephone displays a 'TEST FAIL' message, it could be due to several reasons. First, check if the U-terminal is currently busy and try the test again when it's free. Also, ensure that the U-terminal is not in TQ/ACB/ACD mode. Verify that you've correctly entered the Strata CTX BRI PCB slot or circuit number. Finally, confirm that the U-terminal supports loop back testing, and inspect the BRI PCB and wiring for any defects.
  • E
    Erin DavisAug 14, 2025
    What to do if Toshiba Telephone shows TEST EXIT?
    • N
      Nicole OconnorAug 14, 2025
      If your Toshiba Telephone displays a 'TEST EXIT' message, this may happen because the Strata CTX processor didn't receive test results from the BRI circuit within 5 seconds. Try restarting the test, making sure the processor gets results in time. Another cause might be that the U-terminal or BRI circuit was unplugged during the test, so check all connections. Also, avoid exiting the test while it is running.

Toshiba Strata CTX100 Specifications

General IconGeneral
BrandToshiba
ModelStrata CTX100
CategoryTelephone
LanguageEnglish

Related product manuals