Toshiba Strata CTX100 - Msg;Feature Button Activation;Deactivation (DKT3001 Only); Redial;Feature Button Activation;Deactivation (DKT3001 Only)

Station Apparatus
3000-series Telephone Settings
8-18 Strata CTX I&M 10/02
Step 1: To turn DKT2000 Mode On/Off
Important! You must change the mode on DKT3000 telephone before connecting a DKT2004-
CT or DKT2104-CT to the DKT3000.
1. On the DKT3000 telephone, press
++++ROG (simultaneously).
2. Press
.
3. Press
)% (or )% on the DKT3014). LED On = 2000 telephone. LED Off = 3000
telephone.
4. Press
+ROG.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone to reset itself.
Step 2: Connect the cordless telephone to the DKT3000 telephone.
Redial/Feature Button Activation/Deactivation (DKT3001 only)
Your )OH[ button has been set to act as a 5HGLDO button by default. However, you can reprogram
the
)OH[ button to work as Flexible Button, as it it set in system programming. These steps enable
you to change how the button functions.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press
0VJ to toggle On/Off
0VJ LED On: )OH[ button works as Feature Button
0VJ LED Off: )OH[ button works as a 5HGLDO button.
4. Press
+ROG to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Note If you program the )OH[ button to work as Flexible Button 3, you can press

to redial.
Msg/Feature Button Activation/Deactivation (DKT3001 only)
Your 0VJ button has been set by default to work as a 0VJbutton; however, you can reprogram it
to work as Feature Button.
1. Press
++++ROG (simultaneously).
2. Press
.
3. Press
0VJ to toggle On/Off.
0VJ LED On: 0VJoperates as Feature Button
0VJ LED Off: Works as a 0VJ button.
4. Press
+ROG to set the option.
5. Go off-hook, then on-hook to exit the program mode.