Strata CTX100 Installation
Installing the CTX100 Cabinet
2-20 Strata CTX I&M 10/02
Step 9: Install the Main Processor (ACTU) PCB
The Strata CTX100 Base cabinet has one slot dedicated to the processor PCB.
1. Slide the ACTU processor PCB into the first slot on the left side of the cabinet (as shown).
2. Loosen the screw slightly, then slide the processor lock upwards. Tighten the screw so that the
PCB is locked into place.
6003
6004
To Next Page
Loading...
