PCB Installation
ADKU – Digital Telephone Interface Unit
Strata CTX I&M 10/02 4-3
PCB Installation
ADKU – Digital Telephone Interface Unit
Circuits per PCB: eight digital telephone circuits
Interfaces with: all Toshiba digital telephones (corded and cordless, DDCB, DSS, ADM, BPCI)
Older Version(s): none
ADKU Hardware Options
The ADKU digital telephone interface unit only works with the CTX100. Refer to Chapter 8 –
Station Apparatus for instructions on how to connect digital telephones, DDCBs, and DDSS
consoles to the ADKU, as well as how to upgrade digital telephones with these options: a PC
Interface Unit (BPCI), a Speaker Off-hook Call Announce upgrade (BVSU), and a Headset/
External Speaker (BHEU).
ADKU Installation
➤ Insert the ADKU (component side facing right) into the appropriate slot, and apply firm, even
pressure to ensure proper mating of connectors.
To Next Page
Loading...
