Toshiba Strata CTX100 - Worksheet 6: Strata CTX670 Cabinet Slot Configuration

Strata CTX Configuration
Worksheet 6: Strata CTX670 Cabinet Slot Configuration
1-36 Strata CTX I&M 10/02
Worksheet 6: Strata CTX670 Cabinet Slot
Configuration
The cabinet diagram below enables you to write in the PCBs installed in each cabinet slot. Use the
PCB placement guideline below to place PCBs in the correct slots. Fill in the PCBs that go into
each slot from the PCB quantities determined in the worksheets on the previous pages and the
information provided in this worksheet. After completing Worksheet 6, Worksheet 7 must be
completed to verify that the cabinet power factors do not exceed 85.
Notes
● B101 (BECU)/B102 (BBCU) – Main processor slots. BEXS, BBMS, BSIS are optional subassembly PCBs (see
“CTX100 Processor Optional Subassemblies” on page 1-3).
● Cabinet slots marked with * provide 8 time slots; all other slots provide 16 time slots.
● Any combination of up to 96 (basic processor) or 264 (expanded processor) RPTU and RDTU channels can be installed
in the CTX670.
● RDTU and RPTU PCBs can only be placed in odd slots of the Base Cabinet and slots S_01, S_03, and S_05 in any
Expansion Cabinet. If 17 or more channels are used, the next highest slot adjacent to the RDTU or RPTU slot cannot be
used. Slots adjacent to 8 or 16 channel RDTU or RPTU PCBs can be used.
● BDKU, PDKU, RDSU without Speaker OCA can be in any available slot in any cabinet.
● BDKU, PDKU, RDSU with Speaker OCA can be in any available slots in the Base and S_01~S_06 in all Exp. Cabs.
● BDKU/BDKS without Speaker OCA can be in any available slots in the Base and S_01~S_06 in the Expansion Cabs.
Do not install Speaker OCA telephones on BDKU/BDKS.
● Maximum 80 digital telephones per shelf due to the Power Factor restriction.
● For more details, see the following Placement Guidelines section.
Main Location _______________ Remote Location 1___ 2___ 3___ 4___ 5___ 6___
CTX Cabinet Slots
Base B101 B102 S101 S102 S103 S104 S105 S106 S107 S108
PCB Type
BECU
(BEXS)
(BSIS)
BBCU
(BBMS)
Cab 2 S201 S202 S203 S204 S205 S206 S207* S208* S209* S210*
PCB Type
Cab 3 S301 S302 S303 S304 S305 S306 S307* S308* S309* S310*
PCB Type
Cab 4 S401 S402 S403 S404 S405 S406 S407* S408* S409* S410*
PCB Type
Cab 5 S501 S502 S503 S504 S505 S506 S507* S508* S509* S510*
PCB Type
Cab 6 S601 S602 S603 S604 S605 S606 S607* S608* S609* S610*
PCB Type
Cab 7 S701 S702 S703 S704 S705 S706 S707* S708* S709* S710*
PCB Type