Need help?Do you have a question about the Toshiba Strata CIX IPT and is the answer not in the manual?
General| Speakerphone | Yes |
|---|---|
| Headset Jack | Yes |
| Supported Protocols | SIP, H.323 |
| VoIP Support | Yes |
| SIP Trunks | Yes |
| Display | LCD |
| Power over Ethernet (PoE) | Yes |
| Power | PoE or AC adapter |
| Unified Communications | Yes |
Outlines the structure of the manual by chapters, detailing Administrator Mode, DKT/IPT Settings, and IPT2008-SDL Settings.
Provides guidance on how to navigate and use the manual effectively for DKT/IPT telephones.
Lists programmable functions in Administrator mode using soft keys, such as Phone Name, Door Name, and System Speed Dial.
Explains how to navigate functions using telephone buttons and soft keys.
Details the function of IPT and DKT soft keys for navigation and input.
Illustrates the location of Feature Buttons (FB) on different telephone models (20, 10, and 14 button).
Guides on entering and exiting the telephone programming mode for feature setup.
Details the procedure to reset all Programming Mode option settings to their default.
Instructions to turn on/off the 'beep' sound for dial pad and feature buttons on digital telephones.
Steps to lower microphone sensitivity on DKT telephones due to high ambient noise.
Configuration for call waiting and camp-on tones to be sent to the handset or headset.
Procedures to adjust LCD contrast for different telephone models.
How to reprogram Flex and Msg buttons on DKT3001 phones from defaults.
Reprogramming the Flex button to work as Redial or Flexible Button.
Reprogramming the Msg button to work as a Feature Button.
Setting the headset transmitter volume level for DKT telephones.
Steps to reset IP telephone to default settings, cautioning data loss.
Detailed steps for configuring network settings and IP addresses for IPT telephones.
Overview of configuration screens for the IPT2008-SDL telephone, including Term Info, Network, and Advance settings.
Displays Software Version, MAC address, and Regional Code for the telephone.
Configuration options for network parameters like DHCP, IP address, subnet, and gateway.
Procedure to perform a network loop back test to diagnose connectivity issues.
Configuration for advanced network parameters such as DNS servers, GRQ Port, and RRQ Port.
Settings related to audio features like keybeep, room noise, and headset volume.
Configuration for key repeat delay and rate timers.
Settings for language, input timer mode, and input timer value.
Steps to initialize terminal settings to factory defaults or specific configurations.
Procedure to reset the terminal to its default state.
Access to factory-specific settings like ADM/DEBUG mode and display tests.
Details safety compliance with EEC directives and European Norms, including port classifications.
Explains product compliance with EEC EMC directives and specific standards for emissions and immunity.
Declares compliance with EC Radio & Telecommunications Terminal Equipment Directive for connection to public network services.
Lists characteristics of tones and signals used in Strata CIX & CTX systems.
To Next Page