DKT/IPT Settings
Setting the IP Telephone Headset Transmit Volume
20 Strata CIX Telephones Administrator Manual 06/06
Setting the IP Telephone Headset Transmit
Volume
1. Press 3+6+9+Hold (simultaneously).
2. Press
#.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see Table 4).
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED
Off = without).
5. Press
Hold to set the above data.
6. Go off-hook and hang up.
Viewing IP Telephone Terminal Information
1. Press 3+6+9+Hold (simultaneously).
2. Press
1, then press Hold.
3. Press
FB1 to view IPT firmware version (application and boot versions, read
only).
4. Press
FB2 to view IPT MAC address (read only).
5. Go off-hook and hang up.
Table 4 Volume Level Transmitted from Headset Microphone
LEDS
Transmit Level
FB3 FB2 FB1
ON ON ON Level 7 (min.)
ON ON OFF Level 6
ON OFF ON Level 5
ON OFF OFF Level 4
OFF ON ON Level 3 (initial value)
OFF ON OFF Level 2
OFF OFF ON Level 1
OFF OFF OFF Level 0 (max.)