IPT2008-SDL Settings
Configurations
40 Strata CIX Telephones Administrator Manual 06/06
Key Repeat
³ Select Configuration > Key Repeat. The Key
Repeat screen displays.
The general operation on the Key Repeat screens is
as follows:
• To view details of an item displayed on the
scre
ens above, press the soft key that corresponds
to that item.
• Press the SET soft key to rewrite the NV-RAM
data if any setting of an item on this screen is
changed.
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the Configurations Screen without rewriting the NV-RAM data.
Key Repeat OFF/ON
1. Select Configuration > Key Repeat > OFF/ON.
The OFF/ON Setting screen displays.
2. Press the ON or OFF soft keys to change the set
value.
3. Press the SET soft key to accept the change.
...or press the CANCEL soft key to cancel the
change.
The setting is underlined in the Key Repeat
Setting screen display.
Key Repeat Setting
OFF/ON Setting :ON
Repeat Delay Timer:1
Repeat Rate Timer :1
[SET] [CANCEL]
CONFIG
To Next Page
Loading...
Need help?
General