Toshiba Strata CIX IPT - Initialising the IP Telephone

DKT/IPT Settings
Initialising the IP Telephone
16 Strata CIX Telephones Administrator Manual 06/06
Initialising the IP Telephone
CAUTION! If you initialise the IP telephone, all settings return to default.
1. Press
3+6+9+Hold (simultaneously).
2. Press
Vol ▲.
Note Steps 3~5 are optional.
3. Press
FB01 to initialise the telephone’s function settings (LED On = initialise,
LED Off = don’t initialise). See “IP Telephone Function Settings” on page 19 for
details.
4. Press
FB02 to initialise LCD contrast setting (LED On = initialise, LED OFF =
don’t initialise).
5. Press
FB03 to initialise the telephone’s IP network connection settings (LED On =
initialise, LED Off = don’t initialize). See “IPT Setup Instructions” below for
details.
6. Press
Hold again to complete the initialisation process.
7. Go off-hook and hang up.