Toshiba Strata CIX IPT User Manual

DKT/IPT Settings
IPT Setup Instructions
18 Strata CIX Telephones Administrator Manual 06/06
IP Telephone Start Up Sequence
After the IP telephone network setting has been programmed, the following displays
occur after the IP telephone is hung-up:
Action LCD Indication Remarks
1. IPT
i
nitialises.
2. IPT
se
arches
for IP
address.
Possible errors:
• IP address is not
set.
• No DHCP server,
etc.
If error occurs, IP address setting is carried out
continuously.
3. IPT
searches
for BIPU/
LIPU.
Retries every 10 seconds.
Possible errors:
• BIPU is not found
“time out.”
• BIPU is not found
(Station ID
automatic setting).
• BIPU is not found
(StationID manual
setting)
• Multicast address is
not registered
(BIPU IP address
setting mode is automatic setting by multicast)
• BIPU IP address is
not registered
(BIPU IP address
setting mode is manual setting.
INITIALISING
PLEASE WAIT...
IPaddress setting...
IPaddress setting...
Can’t set IPaddress
Searching BIPU...
Searching BIPU.
BIPU not found
Searching BIPU.
Can’t get StationID
Searching BIPU.
StationID unmatch
Not exist Multicast addr
Not exist BIPU address

Toshiba Strata CIX IPT Specifications

General

Brand	Toshiba
Model	Strata CIX IPT
Category	Telephone
Language	English