IPT2008-SDL Settings
Configurations
42 Strata CIX Telephones Administrator Manual 06/06
Other Setting
³ Select Configuration > Others. The Others screen
displays. This screen contains Language, Input
timer Mode and Input Timer Value settings.
Notes
The general operation on the Key Repeat screens is
as follows:
• To view details of an item displayed on the
screens above, press the soft key that corresponds
to that item.
• Press the SET soft key to rewrite the NV-RAM
data if any setting of an item on this screen is changed. The screen goes back to the
Configuration screen after rewriting the NV-RAM data.
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the Configurations Screen without rewriting the NV-RAM data.
Language Mode Setting
1. Select Configuration > Others > Language. The
Language Mode screen displays.
2. Press the English (US/CA), English (UK), French
or Spanish soft keys to change the set value.
3. Press the SET soft key to accept the change.
...or press the CANCEL soft key to cancel the
change.
The setting is underlined in the Key Repeat
Setting screen display
Other Setting
Language:English(US/CA)
Input Timer Mode :OFF
Input Timer Value:2
[SET] [CANCEL]
CONFIG
To Next Page
Loading...
Need help?
General