DKT/IPT Settings
IP Telephone Function Settings
Strata CIX Telephones Administrator Manual 06/06 19
IP Telephone Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
1. Press 3+6+9+Hold (simultaneously).
2. Press
0 then Hold.
3. Press the Feature Buttons to turn the LEDs On/Off (see Table 3).
4. Press
Hold to set the above data.
5. Go off-hook and hang up.
4. Registering
to BIPU
When registering fails, IPT retries by starting at
Step 2 again.
Error message:
“Exxx” is error
number.
5. Registering
completion
- normal
action.
LCD data is indicated from
the system. Example:
Table 3 IP Telephone Function Settings
FB LED ON LED OFF
FB1
Buttons beep. Buttons do not beep.
FB3
Speakerphone/Microphone sensitivity
is lower.
Speakerphone/Microphone sensitivity is
normal.
FB4
Enable handset Busy Override (BOV)
tone.
Disable handset BOV.
FB11
Turn LED On if carbon headset is
attached.
Turn LED Off if carbon headset is not
attached.
Action LCD Indication Remarks
Registering IPT
Registering IPT
Can’t register IPT:EXXX
NO. 205
FEB 28 THURSDAY 01:09
To Next Page
Loading...
Need help?
General