Strata CIX Telephones Administrator Manual 06/06 21
IPT2008-SDL Settings 3
This chapter contains instructions to configure the IPT2008-SDL telephone. All
instructions found in this chapter pertain to the items found in the CONFIG tab of the
IPT2008-SDL telephone.
Configurations
³ Select the CONFIG tab. The screen shown right
displays. This is the Configurations main screen
³ To access any of the screens that relates to an item
on the Configurations screen
³ Press the soft key that corresponds to the item.
The details pertaining to that item display.
Note The following table explains each of the items
displayed on the Configurations screen.
ITEM INFORMATION DISPLAY
Term Info Displays the Software Version, the MAC address and the
Regional Code. You can press the EXIT soft key to go back to
the Configurations screen.
Note This screen is for display only and you cannot make any
changes to the settings.
Configurations
Term Info Key Repeat
Network Net Diag
Advance Factory
Sound Initialize
Others Reset
CONFIG
To Next Page
Loading...
Need help?
General