Strata CIX Telephones Administrator Manual 06/06 7
DKT/IPT Settings 2
This chapter explains how to enter data for your IP and DKT telephones (IPT2010-SD
and IPT2020-SD only).
Important!
• The IPT2010-SD telephone should not be used to program the telephone system.
• Make sure you have the following information
before doing any of the steps found
in this chapter:
IP address, subnet mask number, router addr
ess, Station ID, CIX Strata Net node
number, IP address for the LIPU, etc.
Notes
You may want to enter a period or backspace when performing the following steps.
While in telephone programming mode (Press
3+6+9+Hold (simultaneously) to
enter programming mode), you can use these buttons for the following functions:
• Press
*
to enter a period.
• Press
Vol ▼ to backspace.Press Spkr to cancel entry and start over.
To Next Page
Loading...
