e-STUDIO162/162D/151/151D TEST COMMAND, TROUBLE CODES 10 - 11
22 21 Scanner counter display
(SCAN CNT)
[Function]
The scanner counter is displayed.
[Operation]
22 ADF JAM counter display (S
JAM CNT) (Disabled when
set to OC) (Executable only
when the ADF is installed.)
[Function]
The ADF JAM counter is displayed.
[Operation]
24 01 JAM total counter clear (JAM
TTL CLR.)
[Function]
When [OK (ENTER)/START] key is pressed, the JAM total counter is cleared to 0 and "000,000" is
displayed on the LCD.
[Operation]
04 ADF counter clear (ADF
CLR.) (Disabled when set to
OC) (Executable only when
the ADF is installed.)
[Function]
When [OK (ENTER)/START] key is pressed, the ADF counter value is cleared to 0 and "000,000" is
displayed on the LCD.
[Operation]
05 Duplex counter clear (DPLX
CLR.) (Enabled when
Duplex setting is ON)
[Function]
When [OK (ENTER)/START] key is pressed, the duplex counter value is cleared to 0, and "000,000"
is displayed on the LCD.
[Operation]
06 Developer counter clear
(DVLP CLR.)
[Function]
When [OK (ENTER)/START] key is pressed, the developer counter value is cleared to 0, and
"000,000" is displayed on the LCD.
[Operation]
07 Drum counter clear (DRUM
CLR.)
[Function]
When [OK (ENTER)/START] key is pressed, the drum counter value is cleared to 0, and "000,000" is
displayed on the LCD.
[Operation]
08 Copy counter clear (COPIES
CLR.)
[Function]
When [OK (ENTER)/START] key is pressed, the copy counter value is cleared to 0, and "000,000" is
displayed on the LCD.
[Operation]
Main
code
Sub
code
Contents Details of function/operation
1) Initial display
22-21 SCAN CNT
***,***
1) Initial display
22-22 S JAM CNT
***,***
1) Initial display
24-01 JAM TTL CLR.
CLEARED 000,000
1) Initial display
24-04 ADF CLR.
CLEARED 000,000
1) Initial display
24-05 DPLX CLR.
CLEARED 000,000
1) Initial display
24-06 DVLP CLR.
CLEARED 000,000
1) Initial display
24-07 DRUM CLR.
CLEARED 000,000
1) Initial display
24-08 COPIES CLR.
CLEARED 000,000
e-STUDIO162_151.book 11 ページ ２００４年１２月２日 木曜日 午後９時３７分
To Next Page
Loading...
