Toshiba e-studio 151D - Page 79

e-STUDIO162/162D/151/151D TEST COMMAND, TROUBLE CODES 10 - 10
22 14 ROM version display (ROM
VER.)
[Function]
The P-ROM version is displayed.
Press [
←
/
→
/10KEY] to switch the display version.
[Operation]
16 Duplex counter display
(DPLX CNT) (Enabled when
Duplex setting is ON)
(Executable only when the
RADF is installed.)
[Function]
The duplex counter is displayed.
[Operation]
17 Copy counter display
(COPIES CNT)
[Function]
The copy counter is displayed.
[Operation]
18 Printer counter display
(PRT.CNT)
[Function]
The printer counter is displayed.
[Operation]
19 Scanner mode counter
display (S-MODE CNT)
[Function]
The scanner mode counter is displayed.
[Operation]
Main
code
Sub
code
Contents Details of function/operation
Code number Version Display item
0 Main unit Program MAIN PROG.
1 F-IMC Program F-IMC PROG.
2 LCD DATA LCD DATA
1) Initial display 2) [
→
/10KEY]
2) [
←
/10KEY]
22-14 ROM VER.
MAIN PROG. 00.00
22-14 ROM VER.
F-IMC PROG. 00.00
22-14 ROM VER.
LCD DATA 00.00
1) Initial display
22-16 DPLX CNT
***,***
1) Initial display
22-17 COPIES CNT
***,***
1) Initial display
22-18 PRT.CNT
***,***
1) Initial display
22-19 S-MODE CNT
***,***
10_TESTCOMMAND.fm 10 ページ ２００４年１２月２２日 水曜日 午後１時４９分