What to do if my Toshiba All in One Printer doesn't turn on?
If your Toshiba All in One Printer is not operating, check the following: * Ensure the unit is plugged into a grounded outlet. * Verify the power switch is turned on. * Make sure the side cover is closed securely. * Confirm the front cover is closed, and then close the side cover.
Why does my Toshiba e-Studio 202S All in One Printer frequently misfeed paper?
If your Toshiba All in One Printer frequently misfeeds paper, consider the following possible causes and solutions: * Ensure you are using standard paper. If using special papers, feed the paper through the multi-bypass tray. * Make sure the paper is not curled or damp. Store paper flat in the wrapper in a dry location. * Remove any pieces of misfed paper from inside the unit. * Verify the paper guides in the paper tray are set properly according to the paper size. * Avoid overloading the paper tray or multi-bypass tray; remove excessive paper.
What to do if my Toshiba e-Studio 202S makes blank copies?
If your Toshiba All in One Printer is producing blank copies, check the following: * Ensure the original document is placed face down on the document glass or face up in the ADF. * Verify that the scan head locking switch is unlocked.
Why are images rubbing off the copy easily from Toshiba e-Studio 202S All in One Printer?
If images rub off the copy easily from your Toshiba All in One Printer, it may be due to the following: * The paper might be too heavy. Use paper within the specified range. * The fusing temperature may not be appropriate. In the user programs, set "Fusing temperature setting when the bypass tray is used" (program 29) to "2 (High)". * The paper might be damp. Replace it with dry paper. If the unit is not used for a long time, remove the paper from the paper tray and store it in its wrapper in a dry location.
Why are my Toshiba All in One Printer copies too dark or too light?
If your Toshiba All in One Printer copies are too dark or too light, consider the following: * If the original image is too dark or too light, adjust the exposure manually. * If the unit is in automatic exposure mode, adjust the automatic exposure level. * If the unit is in photo exposure mode, cancel the photo exposure mode.
What to do if the paper tray indicator is blinking on my Toshiba All in One Printer?
If the paper tray indicator is blinking on your Toshiba All in One Printer, push the tray all the way in or load paper in the tray.
How to fix striped copies from Toshiba e-Studio 202S?
If you are getting striped copies from your Toshiba All in One Printer, clean the transfer charger.
What does it mean if "CH" is blinking in the display of my Toshiba All in One Printer?
If "CH" is blinking in the display of your Toshiba All in One Printer, check if the cartridge is installed and close the side cover securely by pressing the round projections near the side cover open button.
Why is printing not uniform between the edges of the paper on my Toshiba e-Studio 202S All in One Printer?
If the printing is not uniform between the edges of the paper on your Toshiba All in One Printer, the fusing temperature may not be appropriate. In the user programs, set "Fusing temperature setting when the bypass tray is used" (program 29) to "1 (Low)".
What does it mean if "P" is blinking in the display of my Toshiba e-Studio 202S?
If "P" is blinking in the display of your Toshiba All in One Printer, load paper or remove the misfed paper.
General| Brand | Toshiba |
|---|---|
| Model | e-Studio 202S |
| Category | All in One Printer |
| Language | English |
To Next Page
