Toshiba e-STUDIO 207L - Paper Misfeed in the Automatic Duplexing Unit

1 TROUBLESHOOTING FOR THE HARDWARE
24 Clearing a Paper Misfeed
 Paper misfeed in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or
automatic duplexing unit.
This could injure you.
4
Lower the transfer unit carefully and then close the automatic duplexing unit.
1
Open the automatic duplexing unit on the right.
2
Remove paper misfed on the paper transport path
above the fuser unit. (Only for e-STUDIO357/457/507)
3
While holding the green lever to lift up the transfer
unit, remove the misfed paper.
2
1