Toshiba e-STUDIO 207L - Paper Misfeed in the Inner Finisher MJ-1032 N and the Hole Punch Unit MJ-6007 (both Optional)

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 41
1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Inner Finisher MJ-1032N and the Hole Punch Unit MJ-6007 (both
optional)
19
Holding both green knobs with your fingers, close the
transport guide on the left.
20
Return the Saddle Stitch unit to its original position.
21
Close the cover of the Hole Punch Unit when it is
installed.
22
Close the front cover of the finisher.
11
1
Lift up the control panel and then open the front cover
of the finisher.
2
1