5.MANAGING PRINT JOBS FROM THE CONTROL PANEL
Monitoring the Print Job Status 155
5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
4
Enter the department code using the digital keys, and then press [OK].
The above screen will not be displayed when the equipment is not managed by the department codes. Proceed
to the next step.
5
Press [USB].
Do not disconnect the USB storage device when “USB DEVICE in use Do not remove USB DEVICE” is
displayed on the screen. Removing the device while the message is displayed could destroy the data in the
device or cause a malfunction of the equipment.
To Next Page
Loading...
